Cây lg D380 này lỗi eMMC Vì là dùng chip SKhynix, xin hỏi anh em có box nào fix được partition nó chưa? Thanks
Cũng đang làm cây oppo R827 EMMC 4GB samsung thay EMMC 8GB samsung sai patition mà chưa fix được. Đã đổi CID đúng với CID của preloader nạp preloader boot mbr uboot recovery secro bằng emmc plus rút cab flash bằng tool cứ báo lỗi 4032. AE nào có kinh nghiệm vụ này chia sẻ với.
Thử hết cách rồi, chip Sam thì fix mọi thứ ok, chip Hynix thì thua chưa thấy box nào support fix chia lại partition.
Với loại chip này box medusa pro và easy jtag làm cứ trơ ra không OK, thử mọi cách cả rồi không thay đổi. Các chức năng như format Uni thì fail, còn repair partition bằng cách bấm shift cho nó bỏ qua check ID chip thì nó chạy bình thường hết nhưng cũng không thay đổi được phân vùng. Nói chung thuốc cho loại chip này chưa tìm ra.
CMD Pullup Level:2835 mV CMD Active Level:3114 mV Box IO Level:3300 mV CLK Rate:14000 khz HiPower mode is off! ---------- eMMC Device Information ---------- EMMC CID : 90014A4834473164040508A12100618A EMMC CSD : D02701320F5903FFFFFFFFEF8A4040D2 EMMC Manufacturer ID: 0090 , OEM ID: 014A EMMC Date: 06/2014 Rev.0x5 EMMC NAME: H4G1d , S/N: 144777472 EMMC NAME (HEX): 48344731642000 EMMC ROM1 (Main User Data) Capacity: 3728 MB EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB EMMC Permanent Write Protection: No EMMC Temporary Write Protection: No EMMC Password Locked: No Extended CSD rev 1.6 (MMC 4.5) Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured. Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00. H/W reset function [RST_N_FUNCTION]: 0x00 High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000] Partitioning Support [PARTITIONING_SUPPORT]: 0x07 Device support partitioning feature Device can have enhanced tech. Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00 --------------------------------------------- Backup saved: H4G1d _ 144777472_20170316_1626.extcsd Done. Z3X EasyJtag Software ver. 2.5.0.6 Skip loading eMMC Addon Firmware CMD Pullup Level:2835 mV CMD Active Level:3114 mV Input file : C:\Users\Administrator\Desktop\LG D380 dump ok\EMMC_ROM3_H4G1d_27359057_00000000_00400000.bin Writing 0000400000 bytes to 00000000 ...ROM3 (BOOT2 ROM) Full Verify Enabled! Retry writing adress 0x00000000 (Attempt #1)... Retry Fail! Retry writing adress 0x00000000 (Attempt #2)... Retry Fail! Retry writing adress 0x00000000 (Attempt #3)... Retry Fail! Retry writing adress 0x00000000 (Attempt #4)... Retry Fail! Retry writing adress 0x00000000 (Attempt #5)... Retry Fail! Write Block Failed, Reason: DATA SND CRC Error Done.