Medusa PRO v.1.2.2 - 'Box not connected' fix and more! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> Medusa PRO v.1.2.2 is out! Dear Medusa Pro users, Due to some architecture bug in MCU we use and our firmware particularities many of you may have encountered "Box not connected" issue and total incapability to repair phones via eMMC interface. Today we are glad to announce that the solution has been found. Below you will find a tutorial on how to repair this problem, in somewhat unusual manner though Also added support for HTC Desire 601, LG Nexus 5x, Samsung Galaxy J3, Galaxy S3 Progre, Lenovo IdeaTab! Medusa PRO v.1.2.2 Release Notes: - Added support for the following models via eMMC: HTC Desire 601 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG H790 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-J320H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SCL21 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Lenovo A3000F - Read/Write/Erase, Easy Repair, Factory Repair (via scatter), Constructor for Repair Files - Updated help and pinouts in Smart Repair File for LG MS345 (please re-download SRF). - Improved showing of progress status while writing scatter firmware of MediaTek based devices. - Fixed “Cancel” operation for process of writing scatter firmware. - Improvements in "Content Extractor": Improved process of searching contacts Improved exporting of contacts - added UTF-8 support while exporting into text formats - Some GUI changes. - Firmware of Medusa Pro Box has been updated! To update the firmware, please connect the box and only then run the Software. Also you can update box firmware via “Update Box Firmware” button at “Welcome” tab in Software. - All pinouts and Repair procedures are described in Software manuals ("Help" button in Software). How to Repair box firmware, if box not detected by PC and Box status in Medusa Pro Software is “Not connected” after firmware updating. To repair box firmware, do the next: Disconnect all Boxes and other devices from PC. Run the Medusa Pro Software. Open Control Panel -> Device Manager. Open (disassemble) Medusa Pro box. Connect the box to PC via USB cable. Heat up IC U6 (smaller square MCU) on PCB using hot air gun or soldering iron at 150 °C (300 °F) for a few seconds till “libusb-win32 devices / HSJTAG V0x100” device appears in PC Device Manager and Box status in Medusa Pro Software becomes “Connected”. Also LED’s will start blinking at that moment. Go to “Welcome” tab in Medusa Pro Software and press “Update Box Firmware” button. Box firmware should be updated to version 1.13. Note! After repairing box firmware you shouldn’t use previous versions of Medusa Pro Software, please always use the latest actual software version. Note! Tampering seals to repair box won't void your box warranty. Medusa - Ultimate Breakthrough in the Phone Repair! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Medusa PRO v.1.2.3 - FRP reset via eMMC and more! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> Medusa PRO v.1.2.3 is out! Released new Box firmware v.1.14, Reset FRP for Qualcomm-based devices, Software improvements and fixes. Medusa PRO v.1.2.3 Release Notes: - Added Reset FRP lock («Reset FRP» button at «Factory repair» tab in Software) for Qualcomm-based devices. With this option you can Reset FRP via eMMC connection - Released Box firmware v.1.14. In this firmware version fixed Read/Write operations for Hynix and old Samsung eMMC flash chips. Also improved connection procedure for 4-bit Bus Mode and improved stability - Improved Erase operation (now even more faster) while erasing selected partition(s) - Improvements in «Partition Manager»: Added Status Bar (Speed, Progress, ETA) Fixed error with saving selected partitions as «*.mpt» - Some GUI changes - All pinouts and Repair procedures are described in Software manuals ("Help" button in Software). Note! After repairing box firmware you shouldn’t use previous versions of Medusa Pro Software, please always use the latest actual software version. Medusa - Ultimate Breakthrough in the Phone Repair! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Medusa PRO v.1.2.4 - added MSM8909 and MSM8916 support and more! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> Medusa PRO v.1.2.4 is out! Released support for Qualcomm MSM8909 and MSM8916 CPUs, different USB loaders added. Also added support via USB for Huawei SCL-L01, Lenovo A6000, LG H635 and support via eMMC for HTC One X PJ64100, OPPO U705T, Samsung GT-I9003, LG P930, LG E440. Medusa PRO v.1.2.4 Release Notes: - Released support for Qualcomm MSM8909 and MSM8916 CPUs. Different USB loaders added. Read/Write operations are supported. - Added support for the following models via USB: Huawei SCL-L01 - Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files Lenovo A6000 - Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files LG H635 - Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files - Added support for the following models via eMMC: HTC One X PJ64100 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files OPPO U705T - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung GT-I9003 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG P930 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG E440 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files - New features and improvements in "Content Extractor": added support of Full flashes (dumps), which don’t contain partitions inside improved Search operation for media files improved Search operation for contacts and SMS improved recognizing of User data partitions - Some GUI changes - All pinouts and Repair procedures described in the manual ("Help" button in the software) Medusa - Ultimate Breakthrough in the Phone Repair! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Medusa PRO v.1.2.5 is out! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> Medusa PRO v.1.2.5 is out! Released support for Qualcomm MSM8992, USB LG loader added. Also added support via USB for LG H815, LG H818P, LG K600, LG LS991 (in test mode), Huawei Y550-L01, Huawei G620S-L01 and support for Samsung SM-J100H (One SIM) via eMMC! Medusa PRO v.1.2.5 Release Notes: - Released support for Qualcomm MSM8992, USB LG loader added. Read/Write/Full Erase operations are supported - Added support for the following models via USB: LG H815 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG H818P - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG K600 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG LS991 (in test mode) - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Huawei Y550-L01 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Huawei G620S-L01 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Added support for the following model via eMMC: Samsung SM-J100H (One SIM) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files - All pinouts and Repair procedures described in the manual ("Help" button in the software) Medusa - Ultimate Breakthrough in the Phone Repair! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Medusa PRO v.1.2.6 is out! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> Medusa PRO v.1.2.6 is out! Released support for "Qualcomm MSM8x26" cores, added eMMC write verification, added support via USB for LG H962, K420N, D290N and support for Samsung SM-J700H, LG D290N, Huawei G526-L11 via eMMC. Medusa PRO v.1.2.6 Release Notes: - Released support for "Qualcomm MSM8x26" cores (new USB loader added). Read/Write/Full Erase operations are supported. - Added support for the following models via USB: LG H962 - Read/Write/Erase Full, Easy Repair, Partition Manager, Constructor for Repair Files. LG K420N - Read/Write/Erase Full, Easy Repair, Partition Manager, Constructor for Repair Files. LG D290N - Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files. LG D380* - Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files. - Added support for the following model via eMMC: LG D290N - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files. Samsung SM-J700H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files. Huawei G526-L11 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files. - Added eMMC write verification. - All pinouts and repair procedures are described in software manuals ("Help" button in the Software). * This device is already supported via USB in old Medusa Software, it is just revised and added to Medusa Pro Software. Medusa - Ultimate Breakthrough in the Phone Repair! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Medusa PRO v.1.2.7 is out! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> Medusa PRO v.1.2.7 is out! Uploaded “Live logs” for most supported devices in to the Support Area. Added support via USB for Lenovo S856, Huawei G6-L11, Huawei G620-A2 and support for Samsung SM-J500H, LG H788, LG H343 via eMMC. Medusa PRO v.1.2.7 Release Notes: - Added support for the following models via USB: Lenovo S856 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Huawei G6-L11 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Huawei G620-A2 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Added support for the following model via eMMC: Samsung SM-J500H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG H788 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG H343 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Uploaded “Live logs” (software logs with the information about correct device data connection) for most supported devices in to the Support Area. “Live logs” will be useful for checking correctness of your device connection - just compare log of connection operation of your device with “Live log” from the Support Area. - Added more detailed operations’ logging - All pinouts and Repair procedures described in the manual ("Help" button in the software) Medusa - Ultimate Breakthrough in the Phone Repair! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Medusa PRO v.1.2.8 is out! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> Medusa PRO v.1.2.8 is out! Added support via USB for LG D390N, LG H525N, LG VS986W and support for Samsung SM-T310, LG D390N, LG H410 and LG P895 via eMMC. Uploaded new “Live logs” into the Support Area. Medusa PRO v.1.2.8 Release Notes: - Added support for the following models via USB: LG D390N - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG H525N - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG VS986W - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Added support for the following models via eMMC: Samsung SM-T310 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG D390N - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG H410 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG P895 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files - New features and improvements in «Content Extractor»: Added view of deleted data in contacts and SMS DBs ("Show unallocated data" button) Improved media files recognition in supported FS - Uploaded new “Live logs” into the Support Area - All pinouts and Repair procedures described in the manuals ("Help" button in the software) Medusa - Ultimate Breakthrough in the Phone Repair! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Medusa PRO v.1.2.9 is out! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> Dear friends! We wish you and your family a sweet and beautiful New Year! Let this time bring happiness, love, and prosperity to your home and life. May every day of the new year bring pleasant events, satisfaction from your achiements, new horizons, and happiness! Thank you for every day out of 365 days we’ve spent together. Be sure we will further please you with new regular updates! Please note, that we will be on holidays from December 29th till January 3rd. All support issues will be postponed during this period. See you next year! Medusa Box TeamMedusa PRO v.1.2.9 is out! Released new Samsung eMMC features: «Smart Report», «Factory Format», «Write CSD», «Write/Update firmware»). Released writing firmware via USB for devices, based on Qualcomm CPUs (Qualcomm raw images with «rawprogram0.xml», «patch0.xml»). Medusa PRO v.1.2.9 Release Notes: - Added new features for Samsung eMMC chips: Samsung Smart Report This feature shows extended info (check state) of Samsung eMMC chip such as: number of eMMC banks, initialization bad block count, optimal trim size and other information. Samsung eMMC Factory Format This feature is intended to format Samsung eMMC chips. Note, that after performing Factory Format operation all eMMC data will be erased! Samsung eMMC Write CSD This feature allows you to write data to CSD register in Samsung eMMC chips. Samsung eMMC Write/Update firmware This feature allows you to update/write eMMC firmware on Samsung eMMC chip. If eMMC is not connected in Normal (General) Mode, to write eMMC firmware you should force it into Boot Mode using TestPoint. With this update we have added support and firmware for the following Samsung eMMC chips:- KMVTU000LM-B503 [VTU00M] - KMN5U000ZM-B203 [N5U00M] - KMKJS000VM-B309 [KJS00M] - KMK5U000VM-B309 [K5U00M] - KMJJS000WM-B409 [JJS00M] - KLMCG8GE4A-A001 [MCG8GA] - KLM8G1WE4A-A001 [M8G1WA] List of supported Samsung chips will expand in future software updates. To write/update firmware in mentioned above eMMC chips, do the following: Select «eMMC» interface option Select «Brand: eMMC_chips» Select eMMC chip part number in «Model:» software list Press «Help» button to view eMMC pinout and TestPoint picture. Acknowledge the manual. Solder all necessary wires to connect eMMC (if necessary, solder TP wire to force eMMC into Boot Mode, Product name will be displayed as 000000) Press «Connect» button to connect eMMC (if necessary, connect TP to GND) When connection is successful, release (disconnect) TP wire from GND and go to «eMMC service» tab in the software Press «Write/Update firmware» button, select proper eMMC chip from the list and press "Write/Update eMMC firmware" button NOTE: PLEASE DON’T SELECT INCORRECT eMMC (WITH NON MATCHING PART NUMBER)! WRITING INCORRECT FIRMWARE WILL DAMAGE YOUR EMMC! - Box firmware has been updated! To update firmware automatically, it is necessary to connect the Box and only then run the software. Also, you can update Box firmware manually via «Update Box Firmware» button at «Welcome» tab in Medusa Pro software. Note, it won't be possible to use mentioned above Samsung eMMC features without updating Box firmware! - Released writing factory firmware via USB for devices, based on Qualcomm CPUs. This feature («Repair devices based on Qualcomm CPU’s using XML files (*.xml)») allows you to Repair/Write factory firmware on devices, based on Qualcomm CPUs using firmware with «rawprogram0.xml» and «patch0.xml». To make Repair/Write firmware, do the following: Connect the device to PC in «Qualcomm…9008…» Mode. If necessary, use TP Select «USB» interface option Select «Brand: Custom Setting» Select proper «Device (Core)» Select proper Qualcomm loader in «Loader» list Press «Connect» button and wait while device will be connected Go to «Factory repair» tab Press «Repair devices based on Qualcomm CPU’s using XML files (*.xml)» button Select «rawprogram0.xml» and «patch0.xml» files Press «Write» button to write selected firmware Note: some firmware’s XML may contain «modemst1» and «modemst2» partitions for writing. Writing of these partitions may lead to loosing phone’s IMEI and calibration data. Software will automatically deselect and skip writing of these partitions. If you need to write these partitions, you should manually select (check) them and confirm writing. Also, software will automatically make backup (read) these partitions form the phone to «Backup» folder before writing firmware. - Added possibility to make Repair or Write flash without write data verification («Write data verification» option). To make Smart Repair/Factory Repair/Write flash without write data verification, do the following: connect the device, deselect (uncheck) «Write data verification» option in the software and perform Smart Repair/Factory Repair/Write flash operation. - Made some GUI changes. - All pinouts and Repair procedures described in the manuals ("Help" button in the software). Also, we have improved routines of Sony phones connection, based on Qualcomm MSM7225A via Medusa Pro Box and we have uploaded «Medusa Software Installer 2.6.1.1» into the Support Area and Medusa Box site. Medusa - Ultimate Breakthrough in the Phone Repair! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Medusa PRO v.1.3.0 is out! Added support via USB for Xiaomi Mi 4i and Xiaomi Redmi 2 and support for Samsung SM-J200M, Samsung GT-I9100, Samsung GT-I9105, Huawei P7-L10 and Huawei G525-U00 via eMMC. Uploaded new “Live logs” in to the Support Area. Medusa PRO v.1.3.0 Release Notes: - Added support for the following models via USB: Xiaomi Mi 4i - Read/Write/Erase Full flash, Easy Repair, Partition Manager, Constructor for Repair Files. Xiaomi Redmi 2 - Read/Write/Erase Full flash, Easy Repair, Partition Manager, Constructor for Repair Files. - Added support for the following models via eMMC: Samsung SM-J200M - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files. Samsung GT-I9100 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files. Samsung GT-I9105 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files. Huawei G525-U00 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files. Huawei P7-L10 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files. - Uploaded SRF for LG D295F into the Support Area («USER UPLOADED SRF» folder) (Thanks to Mr. Leandro_Grilo) - Uploaded new “Live logs” into the Support Area. - All pinouts and Repair procedures described in the manual ("Help" button in the software) Also, we have improved routines of Sony phones connection, based on Qualcomm MSM7227A via Medusa Pro Box and we have uploaded «Medusa Software Installer 2.6.1.2» into the Support Area and Medusa Box site. Medusa - Ultimate Breakthrough in the Phone Repair! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Medusa PRO v.1.3.1 is out! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> Medusa PRO v.1.3.1 is out! Added support for Samsung SM-G532F, SM-C105, GT-P5210 and more! Added support via eMMC for Samsung SM-G532F, Samsung SM-C105, Samsung GT-P5210, Samsung SCH-R960, LG VS986W and LG F160LV. Added GP Area Partitioning features. Uploaded new “Live logs” in to the Support Area. Medusa PRO v.1.3.1 Release Notes: - Added support for the following models via eMMC: Samsung SM-G532F - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files. Samsung SM-C105 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files. Samsung GT-P5210 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files. Samsung SCH-R960 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files. LG VS986W - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files. LG F160LV - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files. - Added GP (General Purpose) Area Partitioning features: Read data from GPx partitions. Write data to GPx partitions. Create GP partitions (for devices, which supports GP Area Partitioning). - Uploaded new “Live logs” in to the Support Area. - All pinouts and Repair procedures described in the manual ("Help" button in the software) Medusa - Ultimate Breakthrough in the Phone Repair! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Medusa PRO v.1.3.3 - small HTC appetizer <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> Medusa PRO v.1.3.3 is out! Added support for HTC One M8, One M8S, One M7, Desire 820N, Desire 816, Desire 516, Desire 500! Uploaded new “Live logs” into the Support Area. Medusa PRO v.1.3.3 Release Notes: - Added support for the following models via eMMC: HTC One M8 (OP6B700) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files HTC One M8S (0PKV100) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair HTC One M7 (PN07100) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files HTC Desire 820N – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files HTC Desire 816 – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files HTC Desire 500 – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Uploaded SRF for HTC Desire 516 into the Support Area («USER UPLOADED SRF» folder) (thanks to Mr. Dr_Wolodya) - Updated help and pinouts in SRF for LG D618, please re-download SRF file (thanks to Mr. sd2) - Uploaded new “Live logs” into the Support Area - Added more detailed operation's logging - Improved Smart Card communication routines - All pinouts and Repair procedures described in the manual ("Help" button in the software) Medusa - Ultimate Breakthrough in the Phone Repair! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Medusa PRO v.1.3.4 is out! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> Medusa PRO v.1.3.4 is out! Added Factory Repair (Boot) for Sony devices. Added support for Samsung SM-A500FU, Samsung SM-J700F, Huawei G630-U10, Sony D2303, Sony D5503, Sony D6603 via eMMC and support for OPPO A31 via USB. Added possibility to set extended options for boot operation mode. Uploaded new “Live logs” in to the Support Area. Medusa PRO v.1.3.4 Release Notes: - Sony Factory Repair feature has been released! You can try to repair boot on Sony devices via eMMC by using original Sony firmware («*.ftf» and "*.SIN_FILE_SET" versions of firmware are supported) This feature can be useful in case, if you don’t have the same working device to prepare Boot Repair file or device you want to repair currently is not supported. Note, device should have non-damaged native TA (Trim Area), otherwise device will not be repaired. We recommended to make backup of TA before repairing. Also, software will automatically try to detect and backup (read) TA partition from the phone to «Backup» folder before repairing. - Added support for the following models via eMMC: Samsung SM-A500FU - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-J700F - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Huawei G630-U10 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Sony D2303 - Read/Write/Erase, Easy Repair *, Partition Manager, Constructor for Repair Files Sony D5503 - Read/Write/Erase, Easy Repair *, Partition Manager, Constructor for Repair Files Sony D6603 - Read/Write/Erase, Easy Repair *, Partition Manager, Constructor for Repair Files - Added support for the following models via USB: OPPO A31 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Added possibility to set extended options for boot operation mode. From now on you can set the following options: «Boot partition enable», «Boot ACK», «Boot bus width», «Reset boot bus conditions» and «Boot mode» - Box firmware has been updated to 1.16 version! In 1.16 firmware version we have improved eMMC connection and eMMC Read operations To update firmware automatically, it is necessary to connect the Box and only then run the software. Also, you can update Box firmware manually via «Update Box Firmware» button at the «Welcome» tab in Medusa Pro software - Medusa card firmware has been updated to 2.5 version! To run Medusa Pro Software v.1.3.4 and future versions, it is necessary to update card firmware. Also note, that after updating card firmware to v.2.5, it won’t be possible to run older Software versions - Uploaded Full flash for Huawei G620S-L01 into the Support Area - Uploaded new “Live logs” into the Support Area - Added more detailed operations’ logging - Improved work (parsing) with pit files - All pinouts and repair procedures are described in the manual ("Help" button in the software) * Note: device should have non-damaged native TA; otherwise device will not be repaired Medusa - Ultimate Breakthrough in the Phone Repair! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Medusa PRO v.1.3.5 is out - Asus devices repair added! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> Medusa PRO v.1.3.5 is out! Added support for Asus Nexus 7 (ME571K), Asus ZenFone 5 (T00F), Asus ZenFone 5 (T00P KL), Asus Memo Pad 7 (K01A), Asus FonePad (K012), Nokia XL Dual Sim (RM-1030), Nokia Lumia 635 (RM-975), Samsung Galaxy Win Pro SM-G3812, Samsung Galaxy E5 SM-E500H via eMMC and support for LG US991 and Asus ZenFone 2 (Z00LD) via USB. Released support for "Qualcomm MSM8939" core (general QC USB loader added). Read/Write/Full Erase operations are supported. Uploaded new “Live logs” in to the Support Area. Medusa PRO v.1.3.5 Release Notes: - Added support for the following models via eMMC: Asus Nexus 7 (ME571K) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Asus ZenFone 5 (T00F) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Asus ZenFone 5 (T00P KL) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Asus Memo Pad 7 (K01A) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Asus FonePad (K012) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Nokia XL Dual Sim (RM-1030) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Nokia Lumia 635 (RM-975) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-G3812 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. khurram136) Samsung SM-E500H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Added support for the following models via USB: LG US991 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Asus ZenFone 2 (Z00LD) - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Released support for "Qualcomm MSM8939" core (general QC USB loader added). Read/Write/Full Erase operations are supported - Uploaded new “Live logs” in to the Support Area - Made improvements in Help and Pinout viewer - All pinouts and repair procedures are described in the manual ("Help" button in the software) Medusa - Ultimate Breakthrough in the Phone Repair! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Medusa PRO v.1.3.6 is out! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> Medusa PRO v.1.3.6 is out! Added support via eMMC (ISP) for HTC Desire Eye M910n, HTC One DS (PN07710), HTC Desire 626 (OPM9120), HTC Desire 510 (OPCV200), Samsung SM-J500FN, Samsung GT-I9505, LG LS665 and HUAWEI Ascend Mate 7 (MT7-L09). Uploaded new “Live logs” in to the Support Area. Medusa PRO v.1.3.6 Release Notes: - Added support for the following models via eMMC: HTC Desire Eye (M910n) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files HTC One DS (PN07710) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files HTC Desire 626 (OPM9120) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files HTC Desire 510 (OPCV200) - Read/Write/Erase, Easy Repair*, Partition Manager, Constructor for Repair Files Samsung SM-J500FN - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung GT-I9505 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG LS665 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files HUAWEI Ascend Mate 7 (MT7-L09) - Read/Write/Erase, Easy Repair*, Partition Manager, Constructor for Repair Files - Improved create GP partitions procedure - Added last selected folder setting save in Open Firmware dialog window - Uploaded new “Live logs” in to the Support Area - All pinouts and repair procedures are described in the manual ("Help" button in the software) Medusa - Ultimate Breakthrough in the Phone Repair! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Medusa PRO v.1.3.8 is out! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> Medusa PRO v.1.3.8 is out! Added support via eMMC (ISP) for HTC One A9u, HTC One M7 (PN07110), Samsung SM-J120H, Samsung GT-I9500, LG H818P and LG D410hn. Added Qualcomm USB loaders for MSM7x30, MSM8926, MSM8930, MSM8x25, MSM8x25A, MSM8x25Q. Uploaded new “Live logs” in to the Support Area. Some fixes and improvements. Medusa PRO v.1.3.8 Release Notes: - Added support for the following models via eMMC: HTC One A9u - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files HTC One M7 (PN07110) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-J120H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung GT-I9500 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG H818P - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG D410hn - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Added Qualcomm USB loaders for MSM7x30, MSM8926, MSM8930, MSM8x25, MSM8x25A, MSM8x25Q. Read/Write operations are supported (thanks to Mr. rebainoor) - Added reading of Android build info from the device, while connecting it via eMMC - Fixed issue with writing CID operation in some cases - Improved procedure of changing default firmware folder - Updated help and pinouts in Smart Repair File (SRF) for Samsung GT-I9001 (please re-download SRF) (thanks to Mr. Dr_Wolodya) - Box firmware has been updated to 1.18 version! In 1.18 firmware version we have improved eMMC connection and write CID operation. To update firmware automatically, it is necessary to connect the Box and only then run the software. Also, you can update Box firmware manually via «Update Box Firmware» button at the «Welcome» tab in Medusa Pro software. - Uploaded new “Live logs” in to the Support Area - All pinouts and repair procedures are described in the manual ("Help" button in the software) Medusa - Ultimate Breakthrough in the Phone Repair! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Medusa PRO v.1.3.9 is out! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> Medusa PRO v.1.3.9 is out! Added support via eMMC (ISP) for Samsung SM-G316HU, Samsung SM-J320F, LG AS330, LG M400DY and support via USB for LG H961N, LG AS330 and LG M160! Added «eMMC Write/Update firmware» for the numerous of Samsung eMMC chips. Box firmware has been updated. Uploaded new “Live logs” in to the Support Area. Some fixes and improvements. Medusa PRO v.1.3.9 Release Notes: - Added support for the following models via eMMC: Samsung SM-G316HU - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-J320F - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG AS330 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG M400DY - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Added support for the following models via USB: LG H961N - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG AS330 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG M160 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Uploaded SRF for LG K430 into the Support Area («USER UPLOADED SRF» folder) (thanks to Mr. agrsat) - Added «eMMC Write/Update firmware» for the following Samsung eMMC chips: KLM4G1FE3B-B001 (M4G1FB) KMS5U000KM-B308 (SSU00M) KMSJS000KM-B308 (SJS00M) KMVUS000LA-B304 (VUS00A) KLM8G2FE3B-B001 (M8G2FB) KMJJS000WA-B409 (JJS00A) KMKUS000VM-B410 (KUS00M) KMNJS000ZM-B205 (KJS00M) KMK7U000VM-B309 (K7U00M) KMN5X000ZM-B209 (N5XZMB) KLM8G1WEMB-B031 (8WMB3R) KMK7X000VM-B314 (K7XVMB) KMK5X000VM-B314 (K5XVMB) We have tested and added Test Point (TP) pictures to force eMMC into Boot Mode for each of mentioned above eMMC chips. To write/update eMMC firmware, please complete the following steps: Select «eMMC» interface option Select «Brand: eMMC_chips» Select eMMC chip part number in «Model:» software list Press «Help» button to view eMMC pinout and TP picture. Acknowledge the manual. Solder all necessary wires to connect eMMC (if necessary, solder TP wire to force eMMC into Boot Mode, Product name will be displayed as 000000) Press «Connect» button to connect eMMC (if necessary, connect TP to GND) When connection is successful, release (disconnect) TP wire from GND and go to «eMMC service» tab in the software Press «Write/Update firmware» button, select proper eMMC chip from the list and press "Write/Update eMMC firmware" button NOTE: PLEASE DON’T SELECT INCORRECT eMMC (WITH NON-MATCHING PART NUMBER)! WRITING INCORRECT FIRMWARE WILL DAMAGE YOUR EMMC! - Added auto-analyzing of TA (Trim Area) zone in Sony devices (structure, IMEI, lock status). From now on software automatically checks TA zone and inform you, whether TA is correct or it is damaged. You should remember, for successful repair of most Sony devices, their TA should be original and non-damaged. - Box firmware has been updated to 1.19 version! In 1.19 firmware version we have improved eMMC detection procedure. To update firmware automatically, it is necessary to connect the Box and only then run the software. Also, you can update Box firmware manually via «Update Box Firmware» button at the «Welcome» tab in Medusa Pro software. - Uploaded new “Live logs” in to the Support Area - Some changes in log information - All pinouts and repair procedures are described in the manual ("Help" button in the software) Medusa - Ultimate Breakthrough in the Phone Repair! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Medusa PRO v.1.4.0 is out! Massive update! Many models and new features added! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> Medusa PRO v.1.4.0 is out! Massive update! Many models and new features added! Added support via eMMC for LG D856, LG K120K, LG K220DS, LG K330, LG K410, LG K430DS, LG L24, LG M200N, LG TP450, LG VS880PP, LG US215, LG US550, Samsung SM-J320AZ, Samsung SM-G900T, Samsung SM-T210, Nokia Lumia 820, Asus FonePad ME175CG, Asus Zenfone Max Z010D, Huawei RIO-L03 and support via USB for LG D295, LG D856, LG F570S, LG F620, LG K210, LG L24, LG M153! Released write firmware via eMMC feature for devices, CPUs based on Qualcomm (Qualcomm raw images with “rawprogram0.xml”). Released support for Qualcomm MSM8929 and MSM8x12 cores (general QC USB loaders added); Read/Write/Full Erase operations are supported. Also added new loaders for MSM8x10, MSM8x26, MSM8909, MSM8916, MSM8936. Box firmware has been updated. Uploaded new “Live logs” into the Support Area. Some adjustments and improvements were made. Medusa PRO v.1.4.0 Release Notes: - Added support for the following models via eMMC: LG D856 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG K120K - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG K220DS - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG K330 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG K410 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG K430DS - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG L24 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG M200N - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG TP450 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG VS880PP - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG US215 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG US550 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-J320AZ - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-G900T - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Asus FonePad ME175CG - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Asus Zenfone Max Z010D - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Huawei RIO-L03 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Added support for the following models via USB: LG D295 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files. LG D856 - Write, Easy Repair, Partition Manager, Constructor for Repair Files. For repairing it is necessary to disable write data verification. LG F570S - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files. LG F620 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files. LG K210 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files. LG L24 - Write, Easy Repair, Partition Manager, Constructor for Repair Files. For repairing it is necessary to disable write data verification. LG M153 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files. - Uploaded SRF for Samsung SM-T210 into the Support Area ("USER UPLOADED SRF" folder) (thanks to Mr. agrsat). - Uploaded SRF for Nokia Lumia 820 into the Support Area (“USER UPLOADED SRF” folder) (thanks to Mr. mathew_di) - Updated help and pinouts in Smart Repair File (SRF) for Sony D6603 (please re-download SRF) (thanks to Mr. nstm0) - Released writing firmware via eMMC for devices, based on Qualcomm CPUs (Qualcomm raw images with “rawprogram0.xml”). - Released support for Qualcomm MSM8929 and MSM8x12 cores (general Qualcomm USB loaders added); Read/Write/Full Erase operations are supported. - Added Qualcomm USB loaders for MSM8x10, MSM8x26, MSM8909, MSM8916, MSM8936; Read/Write operations are supported. - Improved auto-analyzing of TA (Trim Area) zone in Sony/SE devices (thanks to Mr. Radiotrance) - Box firmware has been updated to 1.20 version! In this firmware version we have improved “Write/Update eMMC firmware” procedure (fixed Write CID error for some eMMC). To update firmware automatically it is necessary to connect the Box and only then run the software. Also, you can update Box firmware manually via “Update Box Firmware” button at the “Welcome” tab in Medusa Pro software. - Uploaded new “Live logs” into the Support Area - Some changes were made in log information - All pinouts and repair procedures are described in the manual ("Help" button in the software) Medusa - Ultimate Breakthrough in the Phone Repair! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Medusa PRO v.1.4.2 is out! New models and USB loaders were added! Medusa PRO v.1.4.2 Release Notes: - Added support for the following models via eMMC: Asus Zenfone 6 (T00G) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Huawei ALE-L21 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-G386F - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-J106F - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-J120F - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-J321AZ - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung GT-I9190 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung GT-I9192 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Added support for the following models via USB: Alcatel OneTouch POP 3 5065D - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Alcatel OneTouch Idol 3 6039Y - Write, Easy Repair, Partition Manager, Constructor for Repair Files Alcatel OneTouch Idol 3 6045I - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Asus ZenFone Selfie (Z00UDB) - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Vivo Y51L - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files ZTE Z9 (NX508J) - Write, Easy Repair, Partition Manager, Constructor for Repair Files - Added 15+ general Qualcomm USB loaders for MSM8909, MSM8917, MSM8926, MSM8928, MSM8936, MSM8916, MSM8976, MSM8994, MSM8996. Read/Write/Full Erase operations are supported - Improved communication in ADB connection Mode - Uploaded SRF for HTC D820U (OPFJ100) into the Support Area ("USER UPLOADED SRF" folder) (thanks to Mr. rohit.sharma73) - Uploaded new “Live logs” in to the Support Area - Some changes were made in log information - All pinouts and repair procedures are described in the manual ("Help" button in the software) More info and discussion are <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> __________________________________________________ WBR, Medusa Box Team
Medusa PRO v.1.4.3 - added Motorola Factory Repair and more! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> Medusa PRO v.1.4.3 is out! Added Factory Repair (Boot) for Motorola devices, based on Qualcomm CPUs. Added support for Motorola XT1021, Motorola XT1030, Motorola XT1032, Motorola XT1034, Motorola XT1541, Motorola XT1064, Motorola XT1097 and Microsoft Lumia 535 (RM-1090) via eMMC. Added new general Qualcomm USB loaders for MSM8909, MSM8936, MSM8974, MSM8994, MSM8996. Uploaded new “Live logs” into the Support Area. Medusa PRO v.1.4.3 Release Notes: - Motorola Factory Repair feature has been released. You can try to repair boot on Motorola devices, based on Qualcomm CPUs, via eMMC by using original Motorola firmwares (firmwares with “*.xml”). This feature can be useful if you don’t have the same working device to prepare Boot Repair file or device you want to repair currently is not supported. Note, device should have non-damaged CID partition, otherwise it could cause problems with writing firmware after repairing. We recommended making backup of CID partition before repairing. Also, software will automatically try to detect and backup (read) CID partition from the phone to “Backup” folder after connecting. - Added support for the following models via eMMC: Motorola XT1021 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Motorola XT1030 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Motorola XT1032 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Motorola XT1034 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Motorola XT1541 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Motorola XT1064 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Motorola XT1097 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Microsoft Lumia 535 (RM-1090) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Box firmware has been updated to 1.21 version! In this firmware version we have improved eMMC Read/Write operations. To update firmware automatically, it is necessary to connect the Box and only then run the software. Also, you can update Box firmware manually via “Update Box Firmware” button at the “Welcome” tab in Medusa Pro software. - Released Pause/Resume operations in Download Manager (“Download *.srf” button in Software). - Uploaded new “Live logs” in to the Support Area - All pinouts and repair procedures are described in the manual ("Help" button in the software) Medusa - Ultimate Breakthrough in the Phone Repair! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
Medusa PRO v.1.4.5 - many new phones added! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> Medusa PRO v.1.4.5 is out! New models added! Added support for LG LS450, LG LS675, LG V520, Samsung SM-J100VPP, Samsung SM-J120A, Samsung SM-J3110, Samsung SM-G386W, Samsung SM-P605, Samsung GT-N7105, HTC One SV C520e (PL80130) and Prestigio PSP 3504 DUO via eMMC. Uploaded new “Live logs” into the Support Area. Medusa PRO v.1.4.5 Release Notes: - Added support for the following models via eMMC: LG LS450 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG LS675 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files LG V520 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-G386W - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-J100VPP - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-J120A - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-J3110 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung GT-N7105 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-P605 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files HTC One SV C520e (PL80130) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Prestigio PSP 3504 DUO - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. help-mi) - Uploaded new “Live logs” into the Support Area - Improved operation logging - Uploaded new eMMC (ISP) pinout picture for another PCB revision of SM-j320F into the Support Area (thanks to Mr. rebainoor) - All pinouts and repair procedures are described in the manual ("Help" button in the software) Medusa - Ultimate Breakthrough in the Phone Repair! <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>
