EasyJtag Suite Classic ver.: 2.5.0.7 / wxWidgets 3.1.0-W-U started. OS ver.: Windows 7 (build 7601, Service Pack 1), 64-bit edition. Admin rights OK undefined Android Explorer ver.: 1.0.0.23 eMMC ODIN ver.: 1.0.11.2 Successfully connected to box on COM13 Box S/N: 0D0140185B0FFE05, ,FW Ver.: 01.58 Box Working Mode: JTAG Box. Box Drivers version: 3.0.1.0, are OK Z3X Card Serial : AA6D-5FE9 , ver: 22 Z3X Card Activation [LG] : NOT ACTIVATED Z3X Card Activation [SAMS] : NOT ACTIVATED Z3X Card Activation [JTAG] : ACTIVATED Z3X EasyJtag Software ver. 2.5.0.7 Loading eMMC Addon Firmware... IO: 3300 mV Box S/N: 0D0140185B0FFE05, ,FW Ver.: 01.58 CMD Pullup Level:3145 mV CMD Active Level:3258 mV Box IO Level:3300 mV CLK Rate:14000 khz HiPower mode is off! ---------- eMMC Device Information ---------- EMMC CID : 90014A483447326111019B63BDF69220 EMMC CSD : D02701320F5903FFFFFFFFEF8A4040D2 EMMC Manufacturer ID: 0090 , OEM ID: 014A EMMC Date: 09/2015 Rev.0x1 EMMC NAME: H4G2a , S/N: 2607005174 EMMC NAME (HEX): 48344732612000 EMMC ROM1 (Main User Data) Capacity: 3728 MB EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB EMMC Permanent Write Protection: No EMMC Temporary Write Protection: No EMMC Password Locked: No Extended CSD rev 1.6 (MMC 4.5) Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1) Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x48. H/W reset function [RST_N_FUNCTION]: 0x01 High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000] Partitioning Support [PARTITIONING_SUPPORT]: 0x07 Device support partitioning feature Device can have enhanced tech. Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x01 --------------------------------------------- Backup saved: H4G2a _2607005174_20170312_2021.extcsd Done. Z3X EasyJtag Software ver. 2.5.0.7 Skip loading eMMC Addon Firmware CMD Pullup Level:3145 mV CMD Active Level:3258 mV Box IO Level:3300 mV CLK Rate:14000 khz Erasing 100000000 bytes from 00000000 ...ROM1 Erase Length has been corrected to 0x0000E9000000 bytes... Erase Done. Running:JEDEC: Partitions config burn... Z3X EasyJtag Software ver. 2.5.0.7 Skip loading eMMC Addon Firmware CMD Pullup Level:3145 mV CMD Active Level:3258 mV Box IO Level:3300 mV CLK Rate:14000 khz Partition configuration: No enhanced user data area User partition write reliability: on No GP1 partition GP1 write reliability: on No GP2 partition GP2 write reliability: on No GP3 partition GP3 write reliability: on No GP4 partition GP4 write reliability: on Card already partitioned HW Parts Config Fail.
Card already partitioned HW Parts Config Fail. Có 2 nguyên nhân : 1 trước đó đã phân vùng 1 lần rồi . 2 là ổ cứng đã đi . Giải pháp cuối cùng là thay emmc khác
