[Giúp đỡ] Repair Oppo R827 báo lỗi nhờ cao nhân xem hộ log

vongtong.lawyer · 15/4/17

Chào anh em trên forum!
Mình có một con oppo r827 cần repair. dưới đây là thông tin em nó:

EasyJtag Suite Classic ver.: 2.5.0.8 / wxWidgets 3.1.0-W-U started.
OS ver.: Windows 7 (build 7601, Service Pack 1). Admin rights OK
undefined
Android Explorer ver.: 1.0.0.23
eMMC ODIN ver.: 1.0.11.2
Successfully connected to box on COM8
Box S/N: 0AXXXXXXXXXXX791, ,FW Ver.: 01.58
Box Working Mode: JTAG Box.
Box Drivers version: 3.0.1.0, are OK
Z3X Card Serial : AAXX-XXXC , ver: 22
Z3X Card Activation [LG] : NOT ACTIVATED
Z3X Card Activation [SAMS] : NOT ACTIVATED
Z3X Card Activation [JTAG] : ACTIVATED

Z3X EasyJtag Software ver. 2.5.0.8

Loading eMMC Addon Firmware... IO: 3300 mV
Box S/N: 0AXXXXXXXXXXX791, ,FW Ver.: 01.58
CMD Pullup Level:3011 mV
CMD Active Level:3289 mV
Box IO Level:3300 mV
CLK Rate:14000 khz
HiPower mode is ON!
---------- eMMC Device Information ----------

EMMC CID : 90014A4834473164040501A107896100
EMMC CSD : D02701320F5903FFFFFFFFEF8A4040D2
EMMC Manufacturer ID: 0090 , OEM ID: 014A
EMMC Date: 06/2014 Rev.0x5
EMMC NAME: H4G1d , S/N: 27330441
EMMC NAME (HEX): 48344731642000
EMMC ROM1 (Main User Data) Capacity: 3728 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x01
---------------------------------------------
Backup saved: H4G1d _ 27330441_20170415_1443.extcsd
Searching for partition tables...
Partitioning not detected...
Done.

Z3X EasyJtag Software ver. 2.5.0.8
Skip loading eMMC Addon Firmware
CMD Pullup Level:3011 mV
CMD Active Level:3289 mV
Box IO Level:3300 mV
CLK Rate:14000 khz
Erasing 100000000 bytes from 00000000 ...ROM1
Erase Length has been corrected to 0x0000E9000000 bytes...
Erase Done.

Running:JEDEC: Partitions config burn...
Z3X EasyJtag Software ver. 2.5.0.8
Skip loading eMMC Addon Firmware
CMD Pullup Level:3011 mV
CMD Active Level:3289 mV
Box IO Level:3300 mV
CLK Rate:14000 khz
Partition configuration:
No enhanced user data area
User partition write reliability: off
No GP1 partition
GP1 write reliability: on
No GP2 partition
GP2 write reliability: on
No GP3 partition
GP3 write reliability: on
No GP4 partition
GP4 write reliability: on
Card already partitioned
HW Parts Config Fail.

Z3X EasyJtag Software ver. 2.5.0.8

Loading eMMC Addon Firmware... IO: 3300 mV
Box S/N: 0AXXXXXXXXXXX791, ,FW Ver.: 01.58
CMD Pullup Level:3021 mV
CMD Active Level:3289 mV
Box IO Level:3300 mV
CLK Rate:14000 khz
HiPower mode is ON!
---------- eMMC Device Information ----------

EMMC CID : 90014A4834473164040501A107896100
EMMC CSD : D02701320F5903FFFFFFFFEF8A4040D2
EMMC Manufacturer ID: 0090 , OEM ID: 014A
EMMC Date: 06/2014 Rev.0x5
EMMC NAME: H4G1d , S/N: 27330441
EMMC NAME (HEX): 48344731642000
EMMC ROM1 (Main User Data) Capacity: 3728 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x01
---------------------------------------------
Backup saved: H4G1d _ 27330441_20170415_1507.extcsd
Searching for partition tables...
Partitioning not detected...
Done.
Xem thêm...

Một số hình ảnh bổ sung:

vongtong.lawyer · 15/4/17

mod giúp mình thêm ảnh vào bài viết giùm.

duongsanhdieu · 15/4/17

Chọn thử format all download. Mà hình set config không thấy tích vào set write_rel_user

longmusic · 16/4/17

dùng easyplus format rồi chọn rom bỏ chon userdata và system thử xem

quang_mobile · 16/4/17

đã fix rồi thì bụp file bin thôi còn chờ gì nữa! ko thì táng file flashtool chừa mấy file cuối ra! hoặc full file flashtool bằng tool plus mặc dù hơi lâu tí!

HyL · 3/6/17

m0rjt0kj said: ↑

câu tắt CLK :)[/QUOT]
câu tắt CLK thế nào vậy bro :cute_smiley16: chỉ giáo em với, đang kẹt mấy con
Xem thêm...

Login|Đăng ký

[Giúp đỡ] Repair Oppo R827 báo lỗi nhờ cao nhân xem hộ log

vongtong.lawyer Gia Đình DONGNAIGSM

vongtong.lawyer Gia Đình DONGNAIGSM

duongsanhdieu Support China Android Super Moderator

longmusic Thành Viên VIP

quang_mobile Hỗ trợ Forum TRƯỞNG BỐI DONGNAIGSM

HyL Gia Đình DONGNAIGSM