[Giúp đỡ] Repair sky A770k lỗi ERROR: Timeout while waiting for DCC Loader response. Trying to recover...FAILE

Thảo luận trong 'Kỷ thuật phần mềm'

  1. Khanh Tran

    Khanh Tran Gia Đình DONGNAIGSM

    Tham gia ngày:
    2/1/15
    Bài viết:
    14
    Đã được thích:
    1
    Open serial port...OK
    Connecting to the RIFF Box...OK
    Firmware Version: 1.37, JTAG Manager Version: 1.56
    Selected Resurrector: [Pantech A770K V1.0.4816.61641]

    Connecting to the dead body...OK
    Detected dead body ID: 0x104200E1 - CORRECT!
    Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
    Adaptive Clocking RTCK Sampling is: [Sample at 2 MHz]

    Resurrection sequence started.
    Establish communication with the phone...OK
    Initializing internal hardware configuration...OK
    Uploading resurrector data into memory...OK
    Starting communication with resurrector...OK

    Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (KYL00M, 0x0003AB400000 Bytes = 14.68 GB)
    Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (KYL00M, 0x000000080000 Bytes = 0.50 MB)

    Flashing the dead body...
    ERROR: Timeout while waiting for DCC Loader response. Trying to recover...FAILED
    ERROR: Failed due to multiple communication errors. Terminating at 0x000000000000