[Chia sẻ] Samsung S2 I9100 repair boot Unbrick OK

Aqua Sta · 18/12/14

[18/12/2014 11:01:24] [START OPERATION_ID = RESURRECT]

[18/12/2014 11:03:07] Open serial port...OK

[18/12/2014 11:03:07] Connecting to the RIFF Box...OK

[18/12/2014 11:03:07] Firmware Version: 1.37, JTAG Manager Version: 1.56

[18/12/2014 11:03:07] Selected Resurrector: [Samsung I9100 V1.0.4724.60074]

[18/12/2014 11:03:07]

[18/12/2014 11:03:07] Connecting to the dead body...OK

[18/12/2014 11:03:07] Detected dead body ID: 0x4BA00477 - CORRECT!

[18/12/2014 11:03:07] Set I/O Voltage reads as 2.81V, TCK Frequency is 8 MHz

[18/12/2014 11:03:07]

[18/12/2014 11:03:07] Resurrection sequence started.

[18/12/2014 11:03:07] Establish communication with the phone...OK

[18/12/2014 11:03:07] Initializing internal hardware configuration...OK

[18/12/2014 11:03:07] Uploading resurrector data into memory...OK

[18/12/2014 11:03:07] Starting communication with resurrector...OK

[18/12/2014 11:03:07]

[18/12/2014 11:03:07] Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (VYL00M, 0x0003AB400000 Bytes = 14.68 GB)

[18/12/2014 11:03:07] Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (VYL00M, 0x000000080000 Bytes = 0.50 MB)

[18/12/2014 11:03:07]

[18/12/2014 11:03:07] Selected Resurrection Data for the eMMC Chip with Capacity = 14.68GB

[18/12/2014 11:03:07]

[18/12/2014 11:03:07] Flashing the dead body...OK

[18/12/2014 11:03:07] Resurrection complete!

[18/12/2014 11:03:07] [FINISH OPERATION_ID = RESURRECT]
Xem thêm...

Login|Đăng ký

[Chia sẻ] Samsung S2 I9100 repair boot Unbrick OK

Aqua Sta Gia Đình DONGNAIGSM