Volcano Updated: 2013-08-30 Connecting... Connection successful,connected state! Version: V3.8 SN:755-711-065 Port:COM4 After format or Flash you have to press & hold power button for at least 1.30 mins. Note for win7 users : Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'. After that the spd drivers will have the ability to be loaded. For many phones, charge pins need to be set in order to identify USB devices. Detecting D+ and D-... Vcc: null Gnd: 20 Detection initiated... Found: D+ = 22, D- = 23 Detection D+/D- with 50.05 seconds! Analyzing USB device, please wait... Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00) Detection completed. Setting pinouts... Pinout setting complete. Available Ports:COM4 Detection initiated... Vcc: null Gnd: 20 Analyzing D+ and D-... D+ = 22, D- = 23 Analyzing USB device, please wait... Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00) Setting... >>Set the Pinouts failed,please reconnect and try again! lỗi này là do thiếu gì vậy . e mới mua volcano box nên chưa rõ lắm nhờ ae giúp đỡ với.
bạn vào đường này C:\VolcanoBox\Drivers\Phone Drivers\SPD SCI-android-usb-driver\x86 nếu là win 32bit setup cái này ra DPInst rồi chạy thử xem đc ko chíp spd nếu chạy qua cáp cắm đit thì ko cần phải nháy nguồn nhé
máy này đã nhận được diver :Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00) chắc chạy chip sc6531 .chọn đời chip rời gắn cáp cho nhận driver rồi nhấn run