Thông tin UFI box dongle update new

UFI Software version 1.2.0.399



Greetings For Our Beloved UFiXErs around The Globe

UFI Software version 1.2.0.399
For UFi BOX & UFi Dongle Available


Introducing P2P(BitTorrent) support download
- Built with Aria2, to enable this function you have to allow the firewall to open when you're prompted to do so
- To prevent data corruptions, specially to users with limited internet connection, files bigger than 1GB should be downloaded using BitTorrent.
- Download tasks were cached, so you can resume later (Check "Autosave Unfinished Downloads" in Settings)

Introducing new app module: UFI CHIP Prog
- Used to work with SPI NOR Flash, SPI EEprom and I2C EEprom chip
- Support various type of chip with fast and easy user interface
- Support for Read, Write, Erase, Verify and Blank check as well as Unlock BP function for SPI Flash
- Usefull for BIOS recovery, Router flashing and so on
- Documentation and adapter coming soon

Introducing UFI Box firmware version 1.10:
- To use UFI Software version 1.2.0.399, upgrade firmware to version 1.10

Support Files changes:
- Over 3.3TB compressed files uploaded to the support server
- Added many popular brands to Android directory
- Added New Schematics, QCN files and USB Drivers

eMMC ToolBox changes:
ADD: Auto retry handling in case of un-successfull "Read" because of chip's bad block
ADD: Auto set partition config based on firmware selection on Factory Image write.
ADD: SANDISK chip Smart and Health report
BUGFIX: Special Task, Resize function was not handled correctly in some case.
BUGFIX: FFU routine improved, in some rare case ffu might not be performed correctly.

Android ToolBox changes:
ADD: Android SDK Path setting(adb.exe and fastboot.exe path)
ADD: Confirmation dialog before auto extracting firmwares
ADD: Special Task menu on the ADB Tab(removed Tool sub tab)
Most function requires devices to be rooted
This menus were dinamically changed based on the connected phone.
Implemented tasks:
- Clean Viruses
- OEM-Unlock
- [Xiaomi] Disable Mi Cloud
- [Samsung] Exit Factory Mode
ADD: Support for MT6750,MT6755(Helio P10),MT6757(Helio P20),MT6795(Helio X10),MT6797(Helio X20)
- Note that most of Helio SoC was fused during production time so -
some partition might be protected for erase and write, in this case only full erase allowed.
ADD: Special Task (MediaTek Tab) menus for:
- [Oppo] Clear Region Lock
- [Coolpad] Exit Factory Mode
- [ASUS] Disable Demo Live
ADD: Enabled erase function for Qualcomm firehose mode(as many users request)
ADD: Special Task (Qualcomm Tab) menus for:
- Full erase (factory erase userarea partition)
- Full erase including boot (erase user area, boot1, boot2)
- [Coolpad] Exit Factory Mode
- [Oppo] Exit Fastboot Mode
This is to fix stuck fastboot mode after change emmc

ADD: "Auto sparse" option on fastboot flashing
Some "system.img" files greater than 2GB may cause fastboot crashes(depend on the fastboot version)
If this option checked, files greater than 2GB will be "sparsed"
BUGFIX: Fastboot detection after reboot bug introduced in version 1.2.0.390
BUGFIX: Workaround for "delayed loading" when opening UFI Android ToolBox

UFI BOX & UFi Dongles are now back on stock, get it at <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

 

Download Here :
<Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

 
------------
<Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

 
------------
<Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

 
------------

UFi BOX Official Site :<Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

 
<Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

 

 

UFI Software version 1.4.0.1464
UFI 4th Anniversary Update is out

<Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

 

Whats NEW :

Code:
!!! WARNING: Do not rename "BRAND" and "MODEL" list to be different as at support site, certain features might not working properly !!!

General changes:
Introducing UFIBox firmware version 1.13
Latest firmware for supported models (Nokia, Meizu, Xiaomi, Oppo, Vivo and others) was uploaded to support servers
Remapped [USB] Device Manager toolbox menu
Revised upgrade firmware routine for boxed with new hardware version

eMMC ToolBox changes:
ADD: Improved reading system information for Android with Project Treble and Android A/B system
BUGFIX: Handing extracted OFP files
WARNING: Extracted OFP firmwares is still encrypted and can only be used from within the UFI Software(including eMMC ToolBox)
Always use self extracted firmware image from OFP file, never use firmware extracts downloaded from internet that are known to have been extracted using UFI software
Using this fimware with other tools may result in bricked devices !!!
BUGFIX: Minor bugfixes and improvements

Android ToolBox changes:
ADD: Introducing UFI CREDIT for flash authentication, unlock bootloader and repair signed imei for new security phones
Currently implemented:
Nokia (by HMD Global) supports for flashing(QC, MTK), repair imei, unlock bootloader
Meizu supports for flashing(QC, MTK, EXYNOS), unlock bootloader(EXYNOS)
Xiaomi supports for flashing(QC, MTK), unlock bootloader for some devices
Oppo supports for flashing(QC) and repair imei(QC, MTK)
ADD: Full support for Nokia phones (by HMD Global)
- Support for phones with old security and new security version: 4 and security version: 8
- Normal flashing via Fastboot mode (both for old and newer phones, requires authentication)
- Unlock Bootloader via "FASTBOOT->Special Task" (requires credits)
- Repair IMEI via "SERVICE->IMEI & PROD ID", need to run in FTM MODE before IMEI tasks(requires authentication)
ADD: Support for Meizu with Exynos platform
- Normal flashing via Fastboot mode(requires authentication)
- Unlock Bootloader via "FASTBOOT->Special Task" (requires credits)
ADD: Support for Latest Oppo phones(Qualcomm platform)
- Normal flashing via Qualcomm EDL mode (requires authentication)
ADD: Full support for Latest Xiaomi phones(Qualcomm and MediaTek platform)
- Normal flashing via Qualcomm EDL mode and MTK BootRom mode(requires authentication)
- Unlock Bootloader for some phones via "FASTBOOT->Special Task"
ADD: IMEI repair support for Newer Oppo phones
- IMEI repair for Oppo requires to have a pair of PCBA Number and Both IMEI number(requires credits)
ADD: Erase FRP and Erase Userdata option while flashing
For effective flashing task, you can now automated Erase FRP and/or Userdata on flashing
ADD: On MediaTek devices, After Identify phones will stay in DA mode so next time you need to do -
some tasks(Write, Erase, Special Task, etc) the software will resume the DA session and continue the task
Note that: DA session will lost if USB disconnected, changing BROM version or you close the UFI software
ADD: Erase FRP and Userdata support with Newer Vivo phones with new security
ADD: Merged IMEI and Product ID functions to "SERVICE->IMEI & PROD ID" tab
ADD: "SERVICE->TOOLS" tab
[Oppo] Secrecy Unlock used to Decrypt Factory Engineering Mode, after unlock you can Unlock Region Lock, Enable DIAG or META mode
[META] Master Clear used to Erase Internal Storage (may work for some old models)
ADD: "SERVICE->REMOTE SERVICE" tab
All Remote Services will be available here(some services can be free or requires credits)
Currently available:
Xiaomi Unbind Mi Account(CLEAN Device Only) by SN
Oppo Calculate AuthTokenDecrypt Code, Similliar to Secrecy Unlock but it done remotely without access to the phone physically
ADD: Added Latest MediaTek BROM version 7.1917.3.0 for latest MediaTek chipset with new PL signature type
BUGFIX: Improved rawprogram.xml parsing to handle misconfigured items for unsplited/sparsed images(vivo)
BUGFIX: Improved ADB Logcat features
BUGFIX: Improved Debug Uart Terminal features (Note that Debug Uart for MediaTek platform requires 921600 baudrate)
BUGFIX: Minor bugfixes and improvements

NOTE:
All features which requires authentication will require credit
Some remote services are free but are required to have atleast 1 credits in your account
See "[ACCOUNT]" menu to see latest available services, status and the service cost
The credits top up system can be accessed directly there
Payment can be made with Paypal(for International) and GO-PAY(For Indonesia)
Credits can also be purchased from available resellers
Mirror Link :
<Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

 
<Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

 
<Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>