Giải pháp : Nokia 105 RM-908 gắn sim sụp nguồn.

Thảo luận trong 'Kỷ thuật phần mềm'

Trạng thái chủ đề:
Không mở trả lời sau này.
  1. Phú SàiGòn-GSM

    Phú SàiGòn-GSM Gia Đình DONGNAIGSM

    Tham gia ngày:
    19/2/14
    Bài viết:
    47
    Đã được thích:
    162
    Giải pháp : Nokia 105 RM-908 gắn sim sụp nguồn.

    Trước tiên,read file từ trong máy ra và mình được file mcu trong đường dẫn
    C:\AdvanceBox Turbo Flasher\Nokia\Recovered\RM-908

    [​IMG]

    Tiếp theo chọn file vừa read ra,nạp vô lại cho em nó = Ok ( Test by me )

    [​IMG]

    Log Flash.

    VBATT Powering Down <<<<
    VBATT Powering Up >>>>
    SET VCCIO Level Done
    SET BSI Load Done

    Booting Phone...
    CPU ID Response: A200341100
    CPU Type: XG110 2.1B
    Phone Booted at after First attempt...

    ******************************************************
    TIME STARTS HERE
    ******************************************************


    Sending PBL 19456 bytes...
    PBL Successfully Sent...

    Sending SBL 65024 bytes...
    SBL Successfully Sent...
    Flash Chip Manufacturer ID: 0x00EF
    Flash Chip Type: 64 Mbit (4Mb x 16) NOR
    Extended Information: Multi-Bank / 1.8v

    Processing Image File: C:\Program Files\Nokia\Phoenix\products\RM-908\rm908_02.700

    FIRMWARE Image Found...
    Number of Sections: 03
    FIRMWARE Certificate Block Sent Successfully...
    Processing Section 01 of 03
    FIRMWARE Erase Block: 0x00800000~0x00A0FFFE
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 2162688 bytes
    Data Checksum: 0551
    Uploading Data Blocks to phone...
    FIRMWARE Data Blocks uploaded to phone...
    Processing Section 02 of 03
    FIRMWARE Erase Block: 0x00C60000~0x00EAFFFE
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 2232896 bytes
    Data Checksum: 89F6
    Uploading Data Blocks to phone...
    FIRMWARE Data Blocks uploaded to phone...
    Processing Section 03 of 03
    FIRMWARE Erase Block: 0x00FFC000~0x00FFFFFE
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 64 bytes
    Data Checksum: 0000
    Uploading Data Blocks to phone...
    FIRMWARE Data Blocks uploaded to phone...
    Start Data Verification... (Please wait)
    Data Verification Successful...


    Exit Flash Mode Done...
    Time Elapse : 00:01:16

    ******************************************************
    You must Factory Reset the phone to enable the
    ringtones and other customized settings to work
    ******************************************************


    Waiting For Phone to go Online...

    5, 4, 3, 2, 1...
    MCU: V 02.70 22-02-13 RM-908 (c) Nokia
    IMEI: 358146052311023
    Product Serial Number: 00775D1AU
    Product Code : 059R4D1
    Module Code : 0205453
    Basic Production Code: 059Q858
    PPM SW Version : V 02.70 22-02-13 RM-908 (c) Nokia MR
    ADSP Version : p V 02.70\n22-02-13\nRM-908\n(c) NMP\nmr
    MCU SW Version : V 02.70 22-02-13 RM-908 (c) Nokia
    HW Version : 3000
    UEM Version : 1328
    UPP Version : 8850
    LCD Version : CMI:BEIHAIv01 ILI9163C
    ********** SIMLOCK INFO **********
    CONFIG_DATA : 0010100000000000
    PROFILE_BITS : 0000000000040002
    ASIC : 11
    PROVIDER : Default Test Operator

    Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open
    Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open
    Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open
    Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open
    Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open
    Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open
    Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open
    ST_LCD_TEST : PASSED

    FACTORY SET TO : Full Factory Set
    OK
    FACTORY SET TO : User Data
    OK
    FACTORY SET TO : Leave Factory
    OK
    FACTORY SET TO : Service Center
    OK
    FACTORY SET TO : Software Upgrade
    OK
    FACTORY SET TO : Production Tune
    OK
     
    Minh Duy GSM, trung057, tonythai4 others thích bài này.
Trạng thái chủ đề:
Không mở trả lời sau này.