tình hình là nhận máy rớt nước vệ sinh ok nhưng khi về chế độ nghỉ mở lên là trắng màn hình. đo đạc đều ok hết thay màn nữa nhưng đều y bênh. nghi chạy lại thử ok luôn nên chia sẻ ae gặp kèo test cho nhanh. MXKEY [MxKey Team HTI PLUS Flasher Interface 1], SN: C0849A62 Using device: USB ROM and HTI, FW ver: 00.50, SN: 01013A62 Connection status: UHCI:HUB::USB 1.10 (Full-speed) Driver: NMWCD, ver: 7.1.32.117 Module ver: 1.0.0.21762(03-12-2014), Library ver: 1.0.0.14473(03-12-2014) Make sure USB cable, Battery and charger are removed from device. Insert USB cable, Battery back to device(make sure to have fully charged battery). Insert Charger or Press phone's power button(if flashing doesnt start automatically) Waiting for USB ROM device ... Make sure USB cable, Battery and charger are removed from device. Insert USB cable, Battery back to device(make sure to have fully charged battery). Insert Charger or Press phone's power button(if flashing doesnt start automatically) Waiting for USB ROM device ... Device synchronized. CPU: XGOLD 213 Sending EBL Loader...OK Sending EBL ...OK Getting EBL Version ... Boot mode: 0xCC EBL version major/minor: 10.37 EBL version: Quantum_Bootloader_10.37_M1S1 Protocol version suggested by phone: 3 Set baud rate to: 6.50 Mbit/s Flash ID: 0089 8982 - 23280001 [Intel NU48F512,512 Mbits] CFI information: Flash settings: 0/1024, size: 0x04000000 1 Block regions: 512 x 0x00020000 = 0x04000000 EBL ready ! Original IMEI: RPL backup already exist (C:\mobileEx\3.5\data\backup\XGOLD__back.RPL) Processing file: rm837__03.32.mcusw Downloading item CODE:rm837__03.32.mcusw_ebl_psi.fls, num block: 4, size: 26 MB Erasing area 0x40000000-0x4001FFFE ...OK Programming completed in 0.344 s Erasing area 0x40040000-0x4005FFFE ...OK Programming completed in 0.328 s Erasing area 0x40060000-0x4015FFFE ...OK Programming completed in 1.626 s Erasing area 0x40280000-0x41B3FFFE ...OK Programming completed in 39.363 s Checksum verified (0x770C) Processing file: rm837__03.32.ppm_s3 Downloading item CUSTackage_s3.ppm_ebl_psi.fls, num block: 1, size: 4.44 MB Erasing area 0x41BC0000-0x4202F7E6 ...OK Programming completed in 7.798 s Checksum verified (0x3930) Processing file: rm837__03.32.image_s3_059P4V3 Downloading item CUSTackage_s3_059P4V3.image.fls, num block: 1, size: 15.63 MB Erasing area 0x421C0000-0x43E1FFFE ...OK Programming completed in 22.752 s Checksum verified (0x1E9B) Total time for flashing process(boot+erase+write) was 7 min 14.328 s Waiting for USB device removal ... Waiting for device boot up ... Device connected: nmwcdc\Nokia C2-00 USB Phonet (), PORT_ID: 361868BE Verifying communication to device OK. Phone type: RM-837 (Nokia 112) SW version: V 03.32 25-09-12 RM-837 (c) Nokia Imei plain: 35725305814666-7 Product code: 059P4T4 Language Pack: - not available. SLPA ver[4]: PA_SL3/PA_SIMLOC30 (15 digit NCK) warning: avoid SW Downgrade & manual erase to this phone ! Camera config: NI00CS00000401022F03, ver: 010.009 RPL saved to "C:\mobileEx\3.5\data\backup\BB5_RM-837_357253058146667_27_12_14_094006_SIM.RPL" SIMLOCK seems to be valid SUPERDONGLE_KEY invalid! - WD timer enabled, phone will reboot itself after 3 min. SIMLOCK_TEST passed SECURITY_TEST passed Imei net: 35725305814666 Version: SIMLOCK SERVER Provider: GSM Test Operator Counter: 0/3, 0/10 CONFIG_DATA: 0010100000000000 PROFILE_BITS: 800000000004000B BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN Market items is empty, please select the correct products path !