info: Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek USB Port (COM8) Boot mode: Brom BBCHIP: 6580 0 ca00 Using Algo 1. Phone detected...Please wait Sending DA agent, please wait... [emmi]EMMC CID: 504e01fe35394a3186 ---------------------------------------------------- BaseBand CPU :MT6580 BaseBand CPU Secure Version : 05 BaseBand CPU Bootloader Version : FE ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 1 GB DRAM ---------------------------------------------------- EMMC: (58Gb+8192Mb) MICRON 0x50314a39354c EMMC FW VERSION: 12:00:00:00:00:00:00:00 EMMC CID: FE014E50314A39354C : 00000000000000 EMMC UA SIZE: 0x1d3000000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x1d3600000 [7.303 GB] Status: USB_FULL_SPEED Detecting high speed port, wait...... If driver not installed, install high speed port driver. If not need high speed port, disable it. After repeat opperation. Detected : MediaTek DA USB VCOM (Android) (COM11) Build ID: LMY47I Display ID: LMY47X.A510FXXU1AOLB Version: 5.1 Build Date: 2018年 11月 01日 星期四 19:27:01 CST Model: X9 Brand: samsung Device: X9 Manufacturer: Samsung Region: US Mediatek Version Release: ALPS.L1.MP6.V2.19_FLYCOM6580.WE.9.L_P1 Dumping Preloader. Start dumping flash, this can take up to 1 hour....... Start processing proinfo Reading: BEGIN: 0x80000 - LEN: 0x300000 Start processing nvram IMEI[1] from NVRAM: 358564520014518 IMEI[2] from NVRAM: 358564520014526 Start processing protect1 ...... Reading: BEGIN: 0x880000 - LEN: 0xa00000 Start processing protect2 ...... Reading: BEGIN: 0x1280000 - LEN: 0xa00000 Start processing lk ...... Start processing boot Start processing recovery Start processing logo ...... Start processing frp ...... Reading: BEGIN: 0x4fa0000 - LEN: 0x100000 Start processing nvdata ...... Reading: BEGIN: 0x50a0000 - LEN: 0x2000000 Start processing secro Reading: BEGIN: 0x9a00000 - LEN: 0x600000 Start processing system Reading: BEGIN: 0xa800000 - LEN: 0x60000000 Saved to : C:\Users\Kien Huynh\Documents\Android_MTK\firmware_backup\MT6580_EMMC_samsung_X9_5_1_ALPS_L1_MP6_V2_19_FLYCOM6580_WE_9_L_P1(2019_01_07_08_45) Wait untill phone will start charging. All done. AE check INFO trước khi up rom rom đã test oke! demo: link <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!> tốc độ cao! rom có đặt pass bấm MUA bên dưới để lấy pass