Welcome to Octoplus/Octopus Box Samsung software version 1.4.5 ----------------------------------------------------------------------------------- To connect SC-01C phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->Applications->Development. 3. Turn on "USB Debugging" option. 4. When the message appears press "Yes". 5. Connect USB cable to the phone. 6. Press "Read Info" in software. ----------------------------------------------------------------------------------- Platform: Samsung Anycall Selected port: COM12 Selected model: SPH-W5000 Mode: Normal Phone model: SPH-W5000 Firmware compiled date: Feb 06 2008 Firmware compiled time: 04:00:00 Firmware released date: Jul 15 2009 Firmware released time: 09:39:07 Phone IMEI: 353793-02-980805-5 Bluetooth MAC: 00:26:5F:10:77:16 User code is set up. Code: 0910 SW version: M6260A-KYRZ-2.5.1030T ----------------------------------------------------------------------------------- Platform: Samsung Anycall Selected port: COM12 Selected model: SPH-W5000 Mode: Normal Phone model: SPH-W5000 Firmware compiled date: Feb 06 2008 Firmware compiled time: 04:00:00 Firmware released date: Jul 15 2009 Firmware released time: 09:39:07 Phone IMEI: 353793-02-980805-5 Bluetooth MAC: 00:26:5F:10:77:16 User code is set up. Code: 0910 SW version: M6260A-KYRZ-2.5.1030T Creating NVM backup Reading NVM done! Unlocking phone... Switching to emergency mode... No diagnostic ports found! Connecting to phone on COM12 Detected phone model: SPH-W5000 Mode: Emergency Detecting firmware type Searching for signatures... Phone is already patched Phone is successfully unlocked